Product description of bridge bucket wheel reclaimer for long stockyard
applications
Long stockyard bridge bucket wheel reclaimer is widely used in raw material yards of iron and steel industries to meet the process requirements of mixing and reclaiming bulk materials such as coal, concentrate and fine ore.
feature
The equipment has high degree of automation, advanced technology and good homogenization effect. At the same time, the product has the characteristics of large stock yard reserves, small floor area and low pollution. It is an advanced mixing process equipment.
composition
The bridge type bucket wheel reclaimer is mainly composed of traveling mechanism, rake system, bucket wheel reclaimer mechanism, bridge, electrical control room, etc.
Working principle
The bucket wheel device of the bridge bucket wheel reclaimer runs back and forth along the length of the bridge. On the cross section of the material pile, the reclaimer of the bucket wheel device takes materials at different reclaiming points for the first time, and the bucket wheel device rotating around the main beam unloads the materials taken down at the low level into the receiving belt conveyor arranged in the main beam at the high level for the second time, When the excavated materials are unloaded to the ground belt conveyor of the system, the third mixing of materials is completed. In this way, the process of continuous reclaiming and unloading completes the reclaiming work.
able of equipment selection parameters
| description |
parameter |
unit |
| material |
煤,铁矿粉等 |
|
| density |
0.8~2.3 |
t/m3 |
| granularity |
<100 |
mm |
| moisture |
<5 |
% |
| stacking capacity |
50~3000 |
t/h |
| Gauge |
16~50 |
m |
NOTICES
The customer shall provide the following information when place order:
- character of bulk material;
- Stockyard information;
- Process flow chart;
- Power supply;
- Communication and control requirements.
Product Tags:
|
|
bridge bucket wheel reclaimer for long stockyard Stacking and Reclaiming System for Stockyard Images
|
